Fortinet Version 4.0 MR1 Administration Manual page 66

Table 9: Installer public properties when installing FortiClient (Part 4 of 4).
Public property
USESWUID
WFLOGALLURLS
WANACCDBDIR
WANACCPROTOCOL
S
WFDONTRATEIP
60
Range Default
[0..1] 1
[0..1] 0
[any valid installatio
directory] n
directory
[csv list of one or
more of:
http,cif,ftp,mapi]
[0..1] 0
Description
0=FortiClient will use a unique
identifier derived from the
computer that FortiClient is
running on.
1=FortiClient will use a software
unique identifier generator
If this is set to 1 and WF is
installed, all URLs visited will be
logged
The directory that the WAN
acceleration database should be
located
The protocols that should be
accelerated
If set to 1 and if an IP address is
browsed to (instead of a FQDN),
FortiClient will not request a rating
for that IP address from the
FortiGuard network.
FortiClient Endpoint Security Version 4.0 MR1 Administration Guide
Appendix A: Installer Public Properties
Comment
1 is the preferred option, 0 can
lead to unique identifier collisions.
Note: If making hard disk images,
the "RemoveFortiClientID" tool
before creating the image.
04-40001-99556-20090626
http://docs.fortinet.com/ • Feedback