Appendix A: Installer Public Properties - Fortinet Version 4.0 MR1 Administration Manual

Appendix A: Installer Public Properties

Appendix A: Installer Public
Properties
Table 9: Installer public properties when installing FortiClient (Part 1 of 4).
Public property
ADMINMODE
ADMINPWD
AV_BEFORE_VPN
COMPLIANCE_POLIC
Y
DISABLEPROXYSELF
TEST
DISABLESWUPDATES [0..1]
ENABLE_FORTIPROX
Y
ENABLE_REGMON
FMGRAVALERTINT
FMGRDISCOVERATT
EMPTS
FortiClient Endpoint Security Version 4.0 MR1 Administration Guide
04-40001-99556-20090626
http://docs.fortinet.com/ • Feedback
Table 9 shows a list of installer public properties that can be specified when installing
FortiClient. The public properties can also be embedded into the MSI by using an MSI
editing tool to make changes to the MSI's property table.
Public properties are case-sensitive.
Caution:
Range Default
[0..1] 0
md5 of the
admin password
[0..1] 0
[OR together: 0
FW=0x1h,
AV=0x2h,
WF=0x4h,
AS=0x8h,
AL=0x10h]
[0..1] 0
0
[0..1] 1
[0..1] 0
300000+ 300000
0+ 0
Description
Disables FortiShield.
FortiClient is locked down from
the moment it is installed with this
password.
0=AV update should be forced
before a VPN connection is
attempted.
1=An AV update is attempted
before VPN connection is
established.
Sets the default "corporate
compliance policy".
0=disable
1=enable
0=no
1=yes
0=no
1=yes
If set to 1, regmon will be enabled
by default.
The reporting window (in
milliseconds).
FortiClient will avoid sending the
same antivirus alert to FortiClient
Manager if it occurs in the this
window.
The number of times to try to
locate FortiClient Manager before
giving up.
Comment
Typically used for troubleshooting.
If the user cancels the AV update
before it is complete, FortiClient
will refuse to connect the VPN
tunnel.
When > 0, FortiClient will show
whether it is currently compliant
with corporate policy.
VPN connections cannot be
established if Forticlient is non-
compliant.
FortiClient uses a proxy for some
functions. The self-test sends a
packet to 1.1.1.1 to determine
whether network connectivity can
be established.
When set to 1, FortiClient will not
seek to obtain SW updates from
FortiProtect Distribution Server.
When managed by FortiManager,
FortiClient will ONLY get software
updates from FortiClient Manager.
Used for troubleshooting.
0=infinite
57