Fortinet Version 4.0 MR1 Administration Manual page 25

Custom Installer Packages
Configuring central management by discovered FortiManager units
FortiClient Endpoint Security Version 4.0 MR1 Administration Guide
04-40001-99556-20090626
http://docs.fortinet.com/ • Feedback
For a FortiClient PC centrally managed by either a primary FortiManager unit on IP
address 172.16.100.5 or a secondary FortiManager unit on 172.16.100.6, the installation
command line is:
FortiClientSetup /v"FMGRENABLED=1 FMGRIP=172.16.100.5
FMGRTRUSTEDIPS=172.16.100.5,172.16.100.6"
Note: You must enter the entire command on a single line.
Example command lines for the .zip package
Expand the .zip package into a folder before you execute these commands.
For a FortiClient PC centrally managed by a FortiManager unit on IP address
172.16.100.5, the installation command line is:
msiexec /i FortiClient.msi FMGRENABLED=1 FMGRIP=172.16.100.5
For a FortiClient PC centrally managed by either a primary FortiManager unit on IP
address 172.16.100.5 or a secondary FortiManager unit on 172.16.100.6, the installation
command line is:
msiexec /i FortiClient.msi FMGRENABLED=1 FMGRIP=172.16.100.5
FMGRTRUSTEDIPS=172.16.100.5,172.16.100.6
Note: You must enter the entire command on a single line.
Using installer command line options, you can enable discovery of FortiManager units and
specify by IP address the FortiManager units from which the FortiClient application
accepts central management.
The command-line options are as follows:
FMGRENABLED=1
FMGRENABLEDISCOVER=1
FMGRTRUSTEDIPS=<FM_IP1>,
<FM_IP2>,...
For a complete list of installer public properties that can be specified when installing
FortiClient, see "Appendix A: Installer Public Properties"
Example command lines for the .exe package
For a FortiClient PC that accepts central management by any FortiManager unit on subnet
172.16.100.0/24, the installation command line is:
FortiClientSetup /v"FMGRENABLED=1 FMGRENABLEDISCOVER=1
FMGRTRUSTEDIPS=172.16.100.0/255.255.255.0"
Note: You must enter the entire command on a single line.
Example command lines for the .zip package
Expand the .zip package into a folder before you execute these commands.
For a FortiClient PC that accepts central management by any FortiManager unit on subnet
172.16.100.0/24, the installation command line is:
msiexec /i FortiClient.msi FMGRENABLED=1 FMGRENABLEDISCOVER=1
FMGRTRUSTEDIPS=172.16.100.0/255.255.255.0
Note: You must enter the entire command on a single line.
This enables FortiManager central management.
This enables the FortiClient application to request central
management.
Specify individual IP addresses, IP address ranges or subnets
from which the FortiClient application accepts central
management.
Managing FortiClient with FortiManager
for more information.
19