Ceiling Mount Installation - Optoma EP709 Manual

Appendices
Please note that
damage resulting from
incorrect installation
will invalidate the war-
ranty.
Warning:
1.> If you buy the ceil-
ing mount from other
company, please ensure
that there is at least
10cm distance between
the bottom cover of
the projector and the
ceiling.
2.> Avoid placing
the projector near
sources of heat such as
airconditioning units
and heaters otherwise it
may overheat and shut
down automatically.
English 3

Ceiling Mount Installation

1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projector
met the following specifications:
Screw type: M3

Maximum screw length: 10mm

Minimum screw length: 8mm
