Adjusting The Projected Image; Adjusting The Projector Image Height - Optoma EP709 Manual

Adjusting the Projected Image

Adjusting the Projector Image Height

The projector is equipped with an elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button
2. Raise the image to the desired height angle
the button to lock the elevator foot into position.

3. Use to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the eleva-
tor foot into position.

3. Use to fine-tune the display angle.
1
Elevator Button
3
Installation
.

2
3
Elevator Foot Tilt Adjusting

, then release
Feet

English