Changing The Input Source Setting - Onkyo HTC-V10X Instruction Manual

HTC-V10X_En.book Page 32 Wednesday, July 21, 2004 2:49 PM
Setup —Continued

■ Changing the input source setting

If you have connected an
TAPE/TV/VIDEO jacks, you must change the input source setting for the
tion correctly. If you have connected a game machine to the LINE jack, you may switch the
input source setting to the connected component.
Example: Switching from "CDR" to "TAPE":
1
INPUT
2
MEMORY
3
MULTI JOG
PUSH TO ENTER
4
MULTI JOG
PUSH TO ENTER
32
component (excluding the DV-S155X) to the DVD/CD or CDR/
AV CONTROLLER
PCM DIGITAL DTS PL DSP STEREO ( GRN )
MULTI IN ( RED )
STANDBY
STANDBY / ON SW LV L CTRL MEMORY TIMER INPUT MULTI JOG
CLEAR
PHONES
PUSH TO ENTER
2 1
Press INPUT to display the current
input source.
The unit displays the current input source
(CDR).
Press
parameter.
The unit displays "NAME SEL" for one
second.
Rotate MULTI JOG to select the con-
nected component.
In this example, select "TAPE."
CDR
VIDEO
LINE
Press MULTI JOG.
The unit displays "COMPLETE" and the
input source changes accordingly.
system to func-
MASTER VOLUME
SURROUND
PR - 155X
3,4
MEMORY to display
TAPE DVD DVD M, In
(See the
TV
next page.)
GAME
the
CD