Connecting A Cd Recorder, Tape Deck, Or Vcr - Onkyo HTC-V10X Instruction Manual

HTC-V10X_En.book Page 24 Wednesday, July 21, 2004 2:49 PM
Connections —Continued
■ Connecting a CD recorder, tape deck, or VCR (CDR/TAPE/TV/VIDEO
jacks)
You can connect the audio input and output of a CD recorder, tape deck, TV, or VCR to these
jacks. Connect the video output from the VCR directly to the TV.
(The following illustration is an example of connecting optional Onkyo products.)
Connect the PR-155X's CDR/TAPE/TV/VIDEO IN jacks to the audio output jacks of the con-
necting component, using an audio connection cable.
To connect a recording component, connect the PR-155X CDR/TAPE/TV/VIDEO OUT jacks
to the audio input jacks on the connecting component using an audio connection cable.
To listen to digital playback from the connected component, connect the PR-155X DIGITAL
INPUT (OPTICAL) CDR/TAPE/TV/VIDEO jack to the digital audio output of the connecting
component using an optical cable.
To connect an Onkyo CDR-201A, connect the PR-155X to the DIGITAL OUTPUT 2 jacks on
the CDR-201A.
• Since audio data is recorded on two channels on a CD-R, CD, or cassette tape, Dolby digital
and other digital audio playback is unavailable through this connection, even if the connec-
tion is digital. However, you can enjoy surround sound, such as Dolby Pro Logic II, using
only an analog connection.
• To connect -compatible Onkyo components, you will need to make an appropriate input
source setting on each component (page 32).
Optical cable
PR-155X
Audio connection cable
24
AUDIO CD RECORDER
INPUT
STANDBY / ON
STANDBY
DIGITAL
DISPLAY
OUTPUT
AUDIO AUDIO
IN OUT
L
R
MULTI JOG
CD
EDIT / NO YES
FINALIZE DUBBING REC
PUSH TO ENTER
CDR - 201A