Onkyo PHA-1045 Instruction Manual page 46

Listening to the Radio—Continued
Selecting DAB Stations
DISPLAY
/
Use the Fast Reverse and Fast
Forward [ ]/[
the DAB stations.
If a secondary service is available, a right
angle bracket (>) is displayed.
Press the Fast Forward [
to the secondary service.
While the secondary service is selected, a
left angle bracket (<) is displayed.
Press the Fast Reverse [
to the primary service.
When you select a station that you've
selected a lot in the past, the letter F (short
for Favorite) is displayed.
If you select a station that cannot be
received properly, a question mark (?) is
displayed.
• You can also use the multi control to select DAB
stations.
46
] buttons to select
] button to listen
] button to return
"F"
"?"
• Once a DAB station has been preset, these front
panel controls will select presets, in Preset mode. To
use them to select DAB stations, select DAB as the
input source, and then press the Stop [ ] button for 3
seconds until "Station Mode" appears on the display.
Displaying DAB Radio Information
Press the remote controller's [DISPLAY] button
repeatedly to display more information about the
selected DAB station.
1. DLS (Dynamic Label Segment)
When tuned to a station that's broadcasting DLS text
data, the text will scroll across the display.
2. Program Type
Displays the type of program.
3. Bit Rate and Audio Mode
Displays the station's bit rate and audio mode
(stereo, mono, or joint stereo).
4. Signal Quality
Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception
5. Multiplex Name
Displays the name of the current multiplex.
6. Multiplex Number and Frequency
Displays the number and frequency of the current
multiplex.
(Scroll)