Onkyo PHA-1045 Instruction Manual page 15

Disc Notes—Continued
Handling Discs
Hold discs by the edge, or by the center hold and edge.
Avoid touching the playback surface (surface with
nothing printed on it).
Label surface
(printed surface)
Do not attach paper or stickers, or write on the
playback or label surface of the disc. Take care not to
scratch or damage the disc.
Precautions for Rental Discs
Do not use discs with residue from cellophane tape,
rental discs with labels which are peeling off, or discs
with decorative labels. This type of disc could get stuck
in the CD player, or could damage the CD player.
Precautions for Inkjet Printable Discs
Do not leave a CD-R/CR-RW having a label printed
with an inkjet printer in the CD player for a long time.
The disc could get stuck in the CD player, or could
damage the CD player.
Remove the disc from the CD player when not being
played, and store it in a case. A freshly printed disc will
stick easily, and should not be played immediately.
Caring for Discs
If the disc is dirty, the CD player will have a hard time
reading signals, and the audio quality may drop. If the
disc is dirty, gently wipe off fingerprints and dust with
a soft cloth. Lightly wipe from the center outwards.
To remove stubborn dust or dirt, wipe
the disc with a soft cloth dampened
with water, and then dry it with a dry
cloth. Do not use cleaning spray for
analog records or antistatic agents, etc.
Never use volatile chemicals such as
benzine or paint thinner as they can impregnate the disc
surface.
Playback
surface
15