How To Make A Bag From A Foodsaver Roll; How To Vacuum Package With Foodsaver Bags - FoodSaver V2860 Quick Start Manual

Getting Started
Registering your appliance is quick and easy at www.foodsaver.com. If you register on our website, you will have the
opportunity to receive special bag and accessory introductory offers. Refer to the registration card in the box.

How to Make a Bag from a FoodSaver Roll

Place Bag Material on Sealing Strip
Open appliance lid and place roll into Roll
1.
Storage Compartment
Lift up Bag Cutter Bar
2.
3. Pull bag material to the outer edge of the
Sealing Strip and lower the Cutter Bar.
(L)
Close and lock the lid using the Latch
4.
5. Press Seal Button (U)
When Progress Lights
6.
complete. Unlock Latch and lift lid.

How to Vacuum Package with FoodSaver Bags

Place Bag in Vacuum Channel
1. Place item(s) in bag, allowing at least 3 inches of
space between bag contents and top of bag.
Open appliance lid and place open end of bag
2.
into Vacuum Channel
Close lid and use Latch
3.
Press appropriate Food Setting Button
4.
Choose Moist for juicy foods or Dry for foods
without liquid. Appliance will default to Dry setting.
Press appropriate Speed Setting Button
5.
Choose Gentle for delicate foods; Normal for
average-sized bags, canisters and all accessories; or
Fast for larger-sized bags and canisters. Appliance
will default to Normal speed.
3
Close and Latch Lid
.
(G)
.
(H)
.
(E)
.
turn off, sealing is
(T)
2
Close and Latch Lid
.
(J)
to lock.
(E)
–
(N)
–
(P)
4
Press Seal Button
You now have one sealed end and need to cut
7.
the bag to the length you need. Pull out enough
bag material to hold item to be vacuum packed,
plus 3 inches.
Gently press and slide Bag Cutter across the
8.
length of the roll.
Now you are ready to vacuum package with your
new bag (see below).
3
Press Vacuum & Seal Button
6. Press Vacuum & Seal Button
vacuum and sealing process.
When Progress Lights
7.
lift lid and remove bag. Refrigerate or freeze if
needed. (See FoodSaver Reference Guide for food
safety tips.)
Note: Let appliance cool down for 20 seconds after
each use. If appliance is engaged prior to 20 seconds
from last use, the error light will flash.
(M) to begin automatic
turn off, unlock Latch,
(T)
5
6