SETTING THE PC MASTER STATION
OUTLINE OF SETTINGS
After installation of the IS-SOFT on the PC has fi nished, make the settings for the PC master station before using it.
Make the settings by following the steps below.
PRECAUTIONS:
Be sure to make the settings before using the PC master station. If the settings have not been made, you cannot use the PC master station.
•
Make the settings correctly. If the settings are not made correctly, the PC master station will not function as you planned.
•
To use a PC master station, it must be registered at
•
The specifi ed license key is needed for the settings. (Keep the provided license key sheet in a safe place.)
•
Be sure to follow the steps below in that order. If you fail to do so, the settings will not be made correctly.
•
Step 1
Step 2
Step 3
Step 4
Step 5
[IP unit registration] on the IP host unit in advance.
Install the IS-SOFT on the PC.
Start up the PC master station.
Make the network settings (→ P. 10)
Register the PC master station at [IP unit registration] of the
system settings on the IP host unit.
Confi rm the network settings.
7