Operations; Sub Station Calling In; Answering A Call From Sub Station - Aiphone CommunCenter Operation Manual

9. Priority level (highest to lowest)
o All Call
o Group Call
o Broadcast Messages
o Direct Messages
o Direct Communication (2 - middle)
o Monitoring
All call, group call, and broadcast messages have the highest priority level. If a PC is in direct
communication with a sub or is monitoring a sub when a high priority call is placed, the
communication will be interrupted and the sub will receive the call. The unit will revert back to its
previous communication state once the priority call is completed.

10. Operations

10.1 Sub station calling in

o Pressing the call button on the substation will trigger a call tone to be heard at the substation.
Pressing the call button additional times will cause the tone to repeat.
o When the call button on a substation is pressed the CommuniCenter will either display a pop up
visual notification, emit a predetermined sound or both, depending on how it was configured.
o During call in, the Call Waiting List will display the unit calling in, showing status of unit and
time that the call was received.
o During call in, the Sub Station Location List will change the device State from "Available" to
"Calling".
10.2 Answering a call from a sub station
o To remove the pop up notification, simply click "OK" on the pop-up or press the space bar on
your keyboard. If you receive multiple calls at the same time, you will receive only one pop-up.
Any calls after the pop-up was removed will generate a new pop-up notification.
Pg. 14
(1 - highest)
(1 - highest)
(1 - highest)
(2 - middle)
(3 - lowest)