Making Transfer Settings - Aiphone IS-SOFT Setting Manual

Making transfer settings

You can transfer a received call to another master station,
another site or a telephone number.
NOTE:
This setting can be made only when the System setting on the IP host
unit has been completed.
1 Select the [Transfer] tab on the Setting window.
[F]
[G]
[H]
[I]
2 Make the settings on this window.
[F] Call transfer
[Transfer]:
Set whether to enable (ON) or disable (OFF) the
transferring function.
[Transfer destination] (Available when "Transfer" is
set to ON):
Click Setting and the list of selectable master stations
and/or remote sites are displayed in the Main window.
Select the target station or remote site (so that it is
highlighted) and then click
The number and name of the selected target is
displayed in the boxes.
[Transfer delay] (Available when [Transfer] is
set to ON and the target is selected at [Transfer
destination]):
Set the delay time of starting transferring after a call is
received.
[G] Schedule transfer
[Transfer]:
Set whether to enable (ON) or disable (OFF) the
transferring on schedule.
[Scheduled destination] (Available when [Schedule
transfer] is set to ON):
Click Setting and the list of selectable master stations
and/or remote sites displayed in the Main window.
Select the target station or remote site (so that it is
highlited) and then click
16
.
.
[H] Telephone transfer (North America only)
[Transfer]:
Set whether to enable (ON) or disable (OFF) the
automatic transferring to telephone.
[I] Schedule tel transfer (North America only)
[Transfer]:
Set whether to enable (ON) or disable (OFF) the
automatic transferring to telephone on schedule.
3
SAVE to save the set contents and overwrite
Click
the previous ones.
If you wish to cancel the set contents, click
*
NOTES:
When set to "ON", lights up.
•
When both [ Call transfer] and [Schedule transfer] are set,
•
[Schedule transfer] takes priority.
CANCEL .