Cleaning Procedure - HP E1418A Service Manual

Cleaning Procedure

Terminal Module
Main Module
Note
26 Operating Information
Use the following procedure to clean the HP E1418A.
Remove the terminal module from the main module.
1.
Disconnect all external wiring.
2.
Clean the terminal module covers with a mild soap solution and
3.
lint-free cloth.
Remove the terminal module cover and blow any dust or debris from
4.
the case.
Reassemble the terminal module.
5.
Reconnect the external wiring.
6.
Remove the terminal module from the main module.
1.
Clean the main module face plate with a mild soap solution and
2.
lint-free cloth.
Disassembling the module exposes the assemblies to ESD damage and is
usually unnecessary. Perform steps 3 through 5 only if the module is
disassembled for repairs or reconfiguration.
Disassemble the module following the instructions in Chapter 6.
3.
Using an airgun with a grounded nozzle, remove dust from the PCA
4.
assemblies.
Reassemble the module.
5.
Chapter 3