Table of Contents
Advertisement
Introduction
WARNING
Equipment
Required
Service Aids
Chapter 6
This chapter contains troubleshooting, repair and maintenance guidelines.
Do not perform any of the service procedures shown unless
you are a qualified, service-trained technician, and have read
the warning on page 6 and the warnings and cautions
beginning on page 10.
Test equipment required is listed in Table 1-1 on page 14. Any equipment
that satisfies the requirements listed in the table may be used.
The HP E1418A uses Torx head screws. To avoid damage to the screw head
slots, use only a Torx driver for disassembly and assembly. You will need a
T10 Torx driver (HP Part Number 8710-1284).
Service aids, manual updates, and service literature may be available for the
HP E1418A. For information, contact your nearest Hewlett-Packard Sales
and Service Office.
Chapter 6
Service
Service 73
Advertisement
Table of Contents
