Olympus Camedia AZ-1 Reference Manual page 199

When the camera is connected to a PC or Printer
The camera is not recognized by the printer.
Possible cause
PC was selected on the
monitor after connecting to
the printer with a USB cable.
The printer is not compatible
with the PictBridge system.
The camera is not recognized by the PC.
Possible cause
The USB driver has not
been installed.
The power is off.
Corrective action
Disconnect the USB cable from the camera and
start again from the beginning.
Refer to the printer's instruction manual, or
consult the printer's manufacturer.
Corrective action
It is necessary to install the USB driver for
Windows 98/98 SE.
Press the POWER switch to turn the camera
on.
Troubleshooting
Ref. Page
P. 147
P. 146
Ref. Page
P. 176
P. 30
12
199