Restore Factory Settings; Radio (Menu 6) - Nokia 7250 User Manual

M e n u f u n c t i o n s
Select Memory
will ask for the security code
when the SIM card's memory is
selected and you want to change
the memory in use, (see
"Selecting the phone book
settings" on page 30) or copy
from one memory to another
("Copying phone books"
33).
• Access codes to change the
security code, PIN code, PIN2
code or barring password. Codes
can only include numbers from 0
to 9.

Restore factory settings

To reset some of the menu settings
to their original values, press Menu,
and select Settings
factory settings. Key in the security
code and press OK. Note that the
data you have keyed in or
downloaded, for example, the names
and phone numbers saved in the
phone book are not deleted.
■ Radio
(Menu 6)
Note: Your
phone must be switched on
to use this function. Do not
switch the phone on when
wireless phone use is
prohibited or when it may
cause interference or
danger.
44
and the phone
on page
and Restore
Copyright © 2004 Nokia. All rights reserved.
To listen to the radio on your phone
connect the headset HDS-3 (stereo)
or HDB-4 (mono) to the headset
connector on the bottom of the
phone. The lead of the headset
functions as the radio antenna, so
let it hang freely.
Note that the quality of the radio
broadcast depends on the radio
station's coverage in that particular
area.
1. To turn on the radio, press
and select Radio. On the display
are
• Channel location number and
the name of the radio channel
if you have saved the channel.
• Frequency of the radio
channel.
2. If you have already saved radio
channels, you can scroll to the
channel you would like to listen
to, or select a radio channel
location 1 to 9 by pressing the
corresponding number key.
When using the headset HDB-4
and HDS-3, press the headset key
to scroll to the desired saved
radio channel.
3. When the radio is on, press
Options and select
turn off the radio.
Tip: To quickly turn off the
radio, press and hold
Menu
Switch off to
.