Call Settings - Nokia 7250 User Manual

The clock serves the functions
Messages, Call register,
clock, timed Profiles ,Calendar
screen saver, for example.
If the battery is removed from the
phone for a long time, you may need
to set the time again.
Date
Press Menu, and select Settings,
Time and date settings
Select Show date (or
the date is shown (or hidden) on the
display when the phone is in standby
mode. Select Set the date
the date. You can also select the
date format.
Auto update of date and time
Press Menu, and select Settings,
Time and date settings
update of date & time
service). To set the phone to
automatically update the time and
date according to the current time
zone, select On. To set the phone to
ask for a confirmation before the
update, select Confirm
The automatic update of the date
and time does not change the time
that you have set for the alarm clock,
calendar or the alarm notes. They are
in local time. Updating may cause
some alarms that you have set to
expire.
Alarm
and
and Date.
Hide date) and
to adjust
and Auto-
(network
first.
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s

Call settings

Call divert
Press Menu, and select Settings,
Call settings and Call divert
(network service). With call divert,
you can direct your incoming calls to
another number, for example, to
your voice mailbox number. For
details, contact your service
provider. Divert options not
supported by your SIM card or your
network operator may not be shown.
Select the divert option you want,
for example, select
divert the voice calls when your
number is busy or when you reject
an incoming call.
To set the divert setting to on, select
Activate and then select the timeout
after which the call is diverted, if
this is available for the divert option.
To set the divert setting to off, select
Cancel, or select Check
this is available for the divert option,
to check whether call divert is
activated or not. Several divert
options may be active at the same
time.
To see the divert indicators in
standby mode, see
on page 2.
Divert if busy to
status, if
"Standby mode"
37