More Settings - Nokia 6820 User Manual

M e n u f u n c t i o n s
• Scroll to GPRS access point
press Select. Key in the Access
Point Name (APN) to establish a
connection to an (E)GPRS
network. Contact your network
operator for the APN.
You can also set the (E) GPRS dial-up
service settings (Access Point Name)
on your PC using the Nokia Modem
Options software, see
page 95. If you have set the settings
on both your PC and on your phone,
note that the PC's settings will be
used.

More settings

Call settings
Press Menu and select Settings,
More settings and
Select
• Call divert (network service) to
direct your incoming calls, for
example to your voice mailbox
number. Divert options that are
not supported by your SIM card
or your network operator may not
be shown. Contact your service
provider for details.
For example, select
to divert your voice calls when
your number is busy or when you
reject an incoming call.
64
and
"PC Suite" on
Call settings.
Divert if busy
Copyright © 2004 Nokia. All rights reserved.
To set the divert setting to on,
select Activate
the timeout after which the call
is diverted, if this is available for
the call divert option. To set the
call divert to off, select Cancel. To
check whether the call divert is
activated or not, select
status if this is available for the
divert option. Several divert
options may be active at the
same time.
To see the divert indicators in
standby mode, see
indicators in standby mode"
page 7.
• Anykey answer
and you can answer an incoming
call by briefly pressing any key,
except , selection keys
when the flip is closed (
and when the flip is open),
and .
• Automatic redial
and your phone will make a
maximum of ten attempts to
connect a call after an
unsuccessful call attempt.
• Speed dialling and select
the names and phone numbers
that are assigned to the speed
dialling keys, from
with the flip closed, or the
corresponding number keys of
the keyboard, can be dialled by
pressing and holding the
corresponding number key.
and then select
Check
"Essential
on
and select On
and
and select On
On and
to