Nokia 6820 User Manual page 74

M e n u f u n c t i o n s
Sending and receiving data via IR
• Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions
between the devices. The
preferable distance between the
two devices in an infrared
connection should be one metre
at most.
• To activate the IR port of your
phone to receive data via IR,
press Menu and select Settings,
Connectivity and Infrared.
• The user of the sending phone
selects the desired IR function to
start data transfer.
If the data transfer is not started
within two minutes after the
activation of the IR port, the
connection is cancelled and has to
be started again.
IR connection indicator
• When is shown
continuously, the IR connection
has been activated and your
phone is ready to send or receive
data via its IR port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.
Note that the IR connection
deactivates automatically.
62 Copyright © 2004 Nokia. All rights reserved.
(E)GPRS
GPRS (General Packet Radio Service)
is a network service that allows
mobile phones to be used for
sending and receiving data over an
Internet Protocol (IP)-based
network.
EGPRS (Enhanced GPRS), also known
as EDGE (Enhanced Data Rates for
Global Evolution) is similar to GPRS
but it enables faster connection. For
more information on availability of
(E)GPRS and data transfer speed,
contact your network operator or
service provider.
The applications that may use
(E)GPRS are multimedia, chat and
text messaging, browsing sessions,
e-mail, remote synchronisation, Java
application downloading and the PC
dial-up (for example, Internet and
e-mail).
Before you can use (E)GPRS
technology:
• Contact your network operator or
service provider for availability
and subscription to the (E)GPRS
service.
• Save the (E)GPRS settings for
each of the applications used
over (E)GPRS.
For information on pricing, contact
your network operator or service
provider.