Access Codes; Voice Privacy - Nokia 6265 User Manual

9244301_6265_2_en_in_tat.fm Page 76 Tuesday, April 25, 2006 4:44 PM
S e t t i n g s

Access codes

You can change your security code and
PIN code. Avoid using codes similar to
emergency numbers such as 911 to
prevent accidental dialling of the
emergency number.
Change security code
The security code controls access to
features such as the security level and
is supplied with the phone. The preset
code is 12345. When you change the
security code, keep the new code
secret and in a safe place, separate
from your phone.
If you enter the wrong security code
five times in succession, you will not be
able to enter a code for 5 minutes,
even if you power off the phone
between incorrect entries.
1. In standby mode, select
Settings > Security >
codes > Change security
2. Enter the current security code
(default is 12345), and select OK.
3. Enter the new security code (up to
10 characters), and select OK.
4. Enter the new security code again,
and select OK.
76
Change PIN code
Before you can change your PIN code,
you must enable PIN code request.
See "PIN code request", p. 75.
1. In standby mode, select
Settings > Security
codes > Change PIN
2. Enter the current PIN code,
and select OK.
3. Enter the new PIN code, and select
OK.
4. Enter the new PIN code again,
and select OK.

Voice privacy

Voice privacy is a network service.
See "Network services", p. ix. If your
wireless service provider or network
operator supports this feature, the
Menu >
voice privacy feature protects the
Access
privacy of your current phone
code.
conversation from other callers placing
phone calls on your same network. In
standby mode, select
Settings > Security
On or Off.
Menu >
> Access
code.
Menu >
> Voice privacy >