9244301_6265_2_en_in_tat.fm Page 91 Tuesday, April 25, 2006 4:44 PM
Save a time
To save a time while the clock is
running, select
Stop
> Save, enter a
name for the measurement, and select
OK. If you do not enter a name, the
total time is used as the default title
for the lap or split time.
Stopwatch options
In standby mode, select
Organiser
>
Stopwatch
following:
Continue—Continues to measure time.
Only appears if clock is running and
you are returning to stopwatch screen.
Show
last—View the last measured
time.
Split
timing—Use the split time
function.
Lap
timing—Use the lap time function.
View
times—Browse saved times.
Delete times
>
One by one
all—Delete saved times.
Operation note
If you press the end key and return to
standby mode, the clock continues to
run in the background, and
appears at the top of the screen.
To return to the
Stopwatch
do the following:
1. In standby mode, select
Organiser
Continue.
2. To stop the clock, select Stop.
Menu
>
and one of the
or
Delete
screen,
O r g a n i s e r
Menu
>
>
Stopwatch
>
91