Remove The Microsd Card; Charge The Battery - Nokia 6131 User Manual

G e t s t a r t e d

■ Remove the microSD card

Important: Do not remove the microSD card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an
operation may damage the memory card as well as the device, and data
stored on the card may be corrupted.
You can remove or replace the microSD card during phone operation without
switching the phone off.
1. Make sure that no application is currently accessing the microSD memory card.
2. Remove the back cover of the phone.
3. Press the microSD card slightly in to release the locking.
4. Remove the microSD card from the slot.

■ Charge the battery

Check the model number of any charger before use with this device. This device
is intended for use when supplied with power from an AC-3 or AC-4 charger.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull
the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the plug from the charger to the jack on the
bottom of your phone.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the
display or before any calls can be made.
16