Nokia 6170 User Manual page 59

M e n u f u n c t i o n s
When you have selected GPRS as a
data bearer, the phone uses EGPRS
instead of GPRS if this is available in
the network. You cannot select
between EGPRS and GPRS, but for
some applications you may be able
to select either GPRS or
(CSD, Circuit Switched Data).
GPRS connection
To define the settings for (E)GPRS
connections, press Menu, and select
Settings, Connectivity,
GPRS connection.
• Select Always online
phone to automatically register
to an (E)GPRS network when you
switch the phone on.
When you start an application
using (E)GPRS, the connection
between the phone and network
is established. When you exit the
application, the (E)GPRS
connection ends, but the phone is
still registred to the (E)GPRS
network.
If you receive a call or a text
message or make a call during an
(E)GPRS connection, the (E)GPRS
connection is suspended (on
hold).
The indicator for GPRS and
(E)GPRS is the same.
48
GSM data
GPRS and
to set the
Copyright © 2004 Nokia. All rights reserved.
• Select When needed
phone to register to an (E)GPRS
network and establish an (E)GPRS
connection when an application
using (E)GPRS requires it. The
(E)GPRS connection will close
when you exit the application.
The phone supports three
simultaneous (E)GPRS connections.
For example, you can browse XHTML
pages, receive multimedia messages,
and have an ongoing PC dial-up
connection at the same time.
GPRS modem settings
You can connect the phone with an
infrared or a data cable connection
to a compatible PC, and use the
phone as a modem to enable
(E)GPRS connection from the PC.
To define the settings for (E)GPRS
connections from the PC, press
Menu, and select Settings,
Connectivity, GPRS
modem settings.
• Select Active access point
activate the access point that
you want.
• Select Edit active access point
change the access point settings.
Contact your network operator or
service provider for the access
point name.
to set the
and GPRS
to
to