Connect To Mailbox - Nokia E50 User Manual

Tip: POP3 is a version of the post office
protocol that is used to store and retrieve
e-mail or Internet mail messages. IMAP4 is
a version of the Internet message access
protocol that lets you access and manage
e-mail messages while the messages are
still on the e-mail server. You can then
choose which messages to download to
your device.
3. In My e-mail address, enter your e-mail address. To
insert @ or other special characters, press *. To
insert a full stop, press 1. Select Next.
4. In Incoming mail serv., enter the name of the
remote server that receives your e-mail, and select
Next.
5. In Outgoing mail serv., enter the name of the remote
server that sends your e-mail, and select Next.
Depending on your mobile operator, you might
have to use your mobile operator's outgoing mail
server instead of your e-mail provider's.
6. In Access point, select the Internet access point your
device should use when it retrieves the e-mails. If
you select Always ask, each time the device starts to
retrieve e-mail, it asks which Internet access point
it should use, but if you select an access point, the
device makes the connection automatically. Select
Next.
Tip: If you select
makes the connection automatically using
the best available Internet access point
from the access point group. Select the
Select group, the device
access point group, and
selection.
7. Enter a name for your new mailbox, and select
Finish.
When you create a new mailbox, the name you give to
the mailbox replaces Mailbox
You can have up to six mailboxes.
Select your default mailbox
If you have defined several mailboxes, you can select
one of them as your default mailbox. To define the
default mailbox, select Options
Mailbox in use and the mailbox.
If you have defined several mailboxes, you must select
the mailbox that you want to use every time you start
composing a new e-mail message.

Connect to mailbox

E-mail addressed to you is not automatically received
by your device, but by your remote mailbox. To read
your e-mail, you must first connect to the remote
mailbox; then select the e-mails you wish to retrieve
into your device. To receive and send e-mail, you need
to register for an e-mail service. To set up a mailbox in
your device, select Messag.
mail Options New mailbox. Contact your service
> >
provider for the correct settings.
To retrieve received e-mail messages to your device and
view them offline, select your mailbox in the
main view. When the device asks
select Yes.
Back to save the
in the Messag. main view.
Settings E-mail
> > >
Options Settings E-
> > >
Messag.
Connect to mailbox?,
39