Advertisement
2. Installation
First install the Connectivity Adapter Cable driver software on your
computer from the CD-ROM supplied in the sales package before
installation of Nokia PC Suite. You can download the latest version of
Connectivity Adapter Cable driver software at http://www.nokia.com/
enhancements.
Note: Do NOT have your Connectivity Adapter Cable connected
to the computer when you install the driver. Doing so causes
the driver to be installed incorrectly.
I Loading the CD-ROM on your computer
1. Exit all Windows programs and insert the Connectivity Adapter Cable
driver CD-ROM into the CD-ROM drive of your computer.
2. If installation does not start automatically, select "Run.." from the
"Start" menu and type "D:\start.exe" (where "D:\" refers to the CD-
ROM drive of the computer ) and press Enter.
I Installing the driver
1. Follow the on-screen instructions to start an installation wizard,
which guides you through the setup process of the driver.
2. The installation wizard first tells you that DKU-5 will be installed on
your computer. Click "Next>" to continue.
3. When the installation has been completed, in some systems the
wizard prompts you to restart your computer. Click "Yes". Note that
you must restart your computer before you can use the program.
4. Remove any disks from their drives, and then click "Finish" to
complete the setup.
Notes for Windows 2000 users
When the cable is connected for the first time, Windows 2000
automatically locates the drivers and software that you previously
installed. If the "Digital signature not found" message is displayed
during the installation process, click "Yes" to complete the installation.
I n s t a l l a t i o n
3
Advertisement
