Installing The Driver - Nokia CA-42 Quick Installation Manual

9235663_CA42_1_en.fm Page 4 Monday, September 13, 2004 11:26 AM
I n s t a l l a t i o n

■ Installing the driver

1. Select Installing the Driver > Install Connectivity Adapter Driver
CA-42. Follow the on-screen instructions to start an installation
wizard, which guides you through the setup process of the driver.
2. When the installation is complete, in some systems the wizard
prompts you to restart your computer. Click Yes. Note that you must
restart your computer before you can use the program.
3. Remove any disks from their drives, and click Finish to complete the
setup.
Now you can install PC Suite again and start using the cable. For more
information, see the Nokia PC Suite documentation.
Notes for Windows 2000 users
When the cable is connected for the first time, Windows 2000
automatically locates the drivers and software that you previously
installed. If Digital signature not found is displayed during the
installation process, click Yes to complete the installation.
Notes for Windows XP users
When the cable is connected for the first time, Windows XP activates the
Found New Hardware Wizard to assist you with the installation of the
CA-42 cable driver. If Windows logo error messages are displayed during
the installation process, click Continue anyway to complete the
installation.
4