Advertisement
Windows Users
Nikon Transfer is supported by the following operating systems:
Preinstalled versions of Windows Vista (32-bit Home Basic/Home Premium/Business/Enterprise/Ultimate editions),
Windows XP Service Pack 2 (Home Edition/Professional), Windows 2000 Professional* Service Pack 4
* If your computer is running Windows 2000 Professional, the COOLPIX S202 cannot be connected to the computer.
Use a card reader or similar device to transfer pictures stored on the memory card to the computer.
Please visit www.nikonusa.com for the latest information on the supported operating systems.
f
Install Software
Nikon Transfer
Click Next to begin installation
of Nikon Transfer.
When installing, using, or uninstalling Nikon Transfer, log on
to an account with administrator privileges.
a
Turn the computer on and insert the Software Suite CD
g
into a CD-ROM drive (under Windows Vista, and choose
The license agreement will be displayed. After taking
Run Welcome.exe in the AutoPlay dialog). Exit all other
the time to read and understand the contents of this
applications and turn off any virus-checking software
agreement, select I accept the terms in the license
before beginning Nikon Transfer installation.
agreement and click Next to accept its terms and
display the ReadMe file. After reviewing the contents of
b
this file, which may contain important information that
could not be included here, click Next.
The Language Selection dialog
h
will be displayed. Confirm the
The destination folder for Nikon Transfer will be displayed.
language and click Next.
Click Next to install Nikon Transfer to this folder, or click
Change... to select another folder.
If the desired language is not
displayed, click Region Selection to choose different
i
region, and then choose the desired language.
Click Install to install Nikon Transfer to the selected
The Software Suite installer dialog will appear.
folder.
c
j
The Install Center window
Click Finish to exit the Nikon
shown at right will be
Transfer installer.
displayed. Click Nikon
Standard Install to install
ArcSoft Panorama Maker
software, Apple QuickTime,
Nikon Transfer, and Microsoft DirectX 9 (Windows
Follow the on-screen instructions to close the Install
XP/2000 only). Note that there may be a delay between
Center window. If a dialog is displayed directing you to
each installation; do not perform any other operations
until all components are installed.
restart the computer, follow the on-screen instructions.
Microsoft DirectX 9 (Windows XP/2000 only)
Custom Install: Install selected software.
If DirectX 9 is not already installed, a DirectX 9 installer dialog will
Link to Nikon: Download trial versions of other Nikon
be displayed. Follow the on-screen instructions to install DirectX 9.
software from a Nikon website or visit Nikon technical
support websites (Internet connection required).
Install Guide: View help information included on the
k
Software Suite CD.
Remove the Software Suite CD from the CD-ROM drive.
This completes installation.
If the Install Program Does Not Start Automatically
Open Computer by selecting Computer from the Start
menu (Windows Vista), open My Computer by selecting My
Computer from the Start menu (Windows XP), or double-
Transfer Pictures to Your Computer
click the My Computer icon on the desktop (Windows
2000 Professional), and double-click the Software Suite CD
icon.
Use a Reliable Power Source
Nikon recommends using a fully charged battery to power the
If Nikon Transfer Is Already Installed
camera for extended periods.
The Language Selection dialog is not displayed if Nikon
Transfer is already installed. The Install Center window is
If You Are Using Windows 2000 Professional
displayed in the language selected when Nikon Transfer
Use a card reader or similar device to transfer pictures stored on
was first installed.
the memory card to the computer. For further information, refer to
"For Users of Windows 2000 Professional."
d
a
ArcSoft Panorama Maker
Turn off the camera. Connect
software
the camera to your computer as
Follow the on-screen
shown in the illustration, using
instructions to install
the USB cable provided. Check
Panorama Maker 4.
to be sure the connector is in the correct orientation and
insert the plug straight. Do not insert or disconnect it
e
forcibly.
Apple QuickTime
Click Yes to install QuickTime
(installation may take several minutes
on some systems).
Installing QuickTime Under Windows Vista
See the Apple, Inc. website for Windows Vista support information.
Nikon recommends downloading and installing the most up-to-
date version of QuickTime for Windows Vista.
Macintosh Users
Nikon Transfer can be used to copy (transfer) pictures to
a computer for storage. Install Nikon Transfer from the
supplied Software Suite CD. For further information, refer
Nikon Transfer is supported by the following operating systems and CPUs:
to the help information contained in the Software Suite
CD or in Nikon Transfer.
• Mac OS X (version 10.3.9, 10.4.11)
• PowerPC G4 or G5 model or Intel Core or Xeon (Universal Binary) model with built-in USB port required
Please visit www.nikonusa.com for the latest information on the supported operating systems.
b
Install Software
Turn on the camera.
Windows Vista
When installing, using, or uninstalling Nikon Transfer, log on
When the AutoPlay dialog is
to an account with administrator privileges.
displayed, select Copy pictures
to a folder on my computer
a
using Nikon Transfer. To bypass
Turn the computer on and insert the Software Suite CD
this dialog in the future, check Always do this for this
into a CD-ROM drive. Exit all other applications and turn
device: . Nikon Transfer will start.
off any virus-checking software before beginning Nikon
Transfer installation.
Windows XP
When the action selection dialog is displayed, select
b
Nikon Transfer Copy pictures to a folder on my
The Software Suite folder opens automatically. Double-
computer, and click OK. Nikon Transfer will start. To
click the Welcome icon.
bypass this dialog in the future, check Always use this
If the folder does not open automatically, double-click the
program for this action..
Software Suite CD icon on the desktop.
c
Nikon Transfer will start. Confirm that the source device is
displayed in the transfer options Source panel and click
c
Start Transfer.
Enter the administrator
name and password
and click OK.
d
The Language Selection
Start Transfer button
Source device
dialog will be displayed.
d
Confirm the language and
click Next.
When transfer is complete, thumbnail images of the
transferred pictures will be displayed in the Explorer
If the desired language is
window.
not displayed, click Region Selection to choose different
region, and then choose the desired language.
The Software Suite installer dialog will appear.
e
The Install Center
window shown
at right will be
displayed. Click
Nikon Standard
Install to install
ArcSoft Panorama
Maker software and
Nikon Transfer.
e
Custom Install: Install selected software.
After confirming that transfer is complete, turn the
Link to Nikon: Download trial versions of other Nikon
camera off and disconnect the USB cable.
software from a Nikon website or visit Nikon technical
Pictures can be displayed in the viewer supplied with
support websites (Internet connection required).
your operating system.
Install Guide: View help information included on the
Software Suite CD.
For Users of Windows 2000 Professional
Use a card reader or similar device to transfer the pictures stored
If Nikon Transfer Is Already Installed
on the memory card to the computer. If the memory card has a
The Language Selection dialog is not displayed if Nikon Transfer
capacity greater than 2 GB, or is SDHC-compliant, the intended
is already installed. The Install Center window is displayed in the
device must support these features of the memory card.
language selected when Nikon Transfer was first installed.
• At the Nikon Transfer default settings, Nikon Transfer will start
automatically when a memory card is inserted into the card
reader or similar device. See step c of "Transfer Pictures to Your
f
Computer" to transfer pictures.
• Do not connect the camera to the computer. If the camera
The ArcSoft license agreement will be displayed. After
is connected to the computer, the Found New Hardware
taking the time to read and understand the contents
Wizard dialog will be displayed. Select Cancel, close the
of this agreement, click Accept to accept its terms and
dialog, and disconnect the camera from the computer.
proceed with installation.
• To transfer pictures stored in the camera's internal memory to
the computer, the pictures must first be copied to a memory
card. For instructions on copying data between the internal
memory and a memory card, see pages 86 and 90 of the User's
Manual.
Nikon Transfer can be used to copy (transfer) pictures to
a computer for storage. Install Nikon Transfer from the
supplied Software Suite CD. For further information, refer to
the help information contained in the Software Suite CD or
in Nikon Transfer.
g
Transfer Pictures to Your Computer
ArcSoft
PanoramaMaker
software
Use a Reliable Power Source
Nikon recommends using a fully charged battery to power the
Click Install and follow
camera for extended periods.
the on-screen instructions
a
to install Panorama Maker 4.
Turn off the camera. Connect
the camera to your computer
h
as shown in the illustration,
The Nikon Transfer license agreement will be displayed.
using the USB cable provided.
After taking the time to read and understand the contents
Check to be sure the connector is in the correct
of this agreement, click Accept to accept its terms and
orientation and insert the plug straight. Do not insert or
proceed with installation.
disconnect it forcibly.
i
Nikon Transfer
The Nikon
Transfer installer
will start. Click
Install and
follow the
b
on-screen
Turn on the camera. Nikon Transfer will start automatically
instructions
if Yes was selected in step j of "Install Software. " Confirm
to complete
that the source device is displayed in the transfer options
installation.
Source panel and click Start Transfer.
j
When prompted, click Yes to have Nikon Transfer start
automatically whenever the camera is connected. This
setting can be changed after installation from the transfer
options Preference panel.
k
Source device
Click Quit to
c
exit the Nikon
When transfer is complete, thumbnail images of the
Transfer installer.
transferred pictures will be displayed in the Finder
window.
l
Click OK to close
the Install Center
window.
d
After confirming that transfer is complete, turn the
camera off and disconnect the USB cable.
Pictures can be displayed in the viewer supplied with your
operating system.
If a dialog is displayed directing you to restart the
computer, follow the on-screen instructions.
m
Remove the Software Suite CD from the CD-ROM drive.
This completes installation.
Start Transfer button
Printed in Japan
FX8H01(11)
6MM63611-01
Advertisement
