Nikon COOLPIX 5000 Software Manual page 3

Step 4
The Device Manager will be displayed. After confirming that "Universal
Serial Bus controllers," "Disk drives," and "Storage volumes" are listed in
the Device Manager, click the "+" sign next to each of these device types.
Step 5
After confirming that "USB Mass Storage Device," "Nikon Digital Camera
USB Device," and "Generic volume" are listed respectively under "Univer-
sal Serial Bus controllers," "Disk drives," and "Storage volumes," double
click each of these listings to open the associated Properties window.
Using Nikon View 4 with Windows XP Home Edition / Windows XP Professional (COOLPIX5000/995/885/775)
If instead the listing "NIKON DSC E5000
(995/885/775)" appears under "Other
Devices", delete this listing and turn the
camera off and then on again. The required
device drivers will be installed automatically.
Step 6
Click the General tab for each device and confirm that "This device is
working properly" appears under "Device status". Click OK.
Close the Device Manager, then click OK to close the System Properties
window. Device registration is now complete.
xp-2