Partition Volume; Repair Disk - Focus FireStore DR-DV5000 User Manual

To exit from the warning screen, press either
NO or EXIT. To begin the format, press the
YES key.
FireStore DR-DV5000 utilizes a FAT32 format
type. If you are using a non-FAT32 formatted
drive, see the section on Partitioning a
volume. Once complete, the disk drive is
ready for use with DR-DV5000. It is advised
that the drive be formatted before a new
record session is begun.

Partition Volume

When an unknown or blank volume type
(HDD) is connected to DR-DV5000, the
Partition process puts a FAT32 format onto
the drive. It will erase any previous partition
and data.
PAGE 33
FireStore DR-DV5000 User Guide
To exit from partition, press either NO or
EXIT. To continue with partition, press the
YES key.
WARNING: PARTITION ERASES ALL
DATA ON THE DISK DRIVE!
Once complete, the disk drive is ready for use
with DR-DV5000.

Repair Disk

REPAIR allows the user to select either
CHECK DISK or CURRENT CLIP.
CHECK DISK scans the entire volume for any
errors (usually, if a disk was corrupted during a
recording due to sudden power loss, check disk
will alert the user of this). To exit check disk,
press either NO or EXIT.