Gpi Settings; Lcd Backlight Settings; Clip Preview Settings - Focus FireStore DR-DV5000 User Manual

FireStore DR-DV5000 User Guide
This menu allows the user to ENABLE or
DISABLE the IR sensor on DR-DV5000.
User simply selects the Menu Item.
Highlighted mode is current mode after
exit. Pressing EXIT will exit back to the
menu screen.

GPI Settings

This menu allows the user to change the setting
of the GPI port. User simply selects the Mode.
Highlighted mode is current mode after exit.
Pressing EXIT will exit back to the menu screen.
DISABLE allows user to connect the supplied
3.5mm to DB9 cable to the GPI port and
control DR-DV5000 via RS232C from an
external device.
The remaining three items allow functions to
occur from a simple contact closure. Modes
are PAUSE/UNPAUSE (allows control of
pause and unpause during a record or
playback session), INDEX (NEW FILE)
(allows a new file to be created during a
record session without losing any frames) and
REC SNAPSHOT (allows a single frame of
video to be recorded to a file. Each sequential
trigger in this mode will add another frame to
the same file until stopped).

LCD Backlight Settings

This menu allows the user to enable or disable
the DR-DV5000 LCD back-light. Highlighted
state is current after exit. Pressing EXIT will
exit back to the menu screen.
The ON setting will keep the back-light on
permanently while the OFF setting will keep
the back-light off permanently. AUTO OFF
will turn off the back light after one minute.
Pressing any keypad button on DR-DV5000
will turn the back-light back on in AUTO
OFF state. This setting is advisable in high
temperature environments and also to reduce
power consumption.

Clip Preview Settings

This menu allows the user to select
CLIP PREVIEW ON or OFF. When CLIP
PREVIEW is ON, the camcorder is in VTR
mode and the user scrolls from one clip to
the next on DR-DV5000 using the buttons, the
first frame of each clip will be generated and
showed via DV output after one second if
the user pauses on that clip.
PAGE 30