Focus FireStore DR-DV5000 User Manual page 11

FireStore DR-DV5000 User Guide
If you are using a digital battery system that
passes battery life status to the camcorder, and
are using a camcorder that is compatible with
these systems, connect the following cables
between DR-DV5000 and camcorder:
Anton/Bauer Digital Battery System
- Grey and Orange Cable
IDX Syncron Digital Battery System
- Blue and Red Cable
4) "Hook" the DR-DV5000 to the rear of the
the GY -DV5000 camcorder. If you are using
a JVC GY-DV5000 camcorder, use care to
ensure that the 52-pin connector on DR-
DV5000 mounts properly to the equivalent
connector on your camcorder. Harness any
loose cables into the "Hidey-Hole" on the DR-
DV5000.
5) Once mounted, secure the two captive
screws at the base of DR-DV5000 to the
camcorder. Ensure that no cables are
"pinched" between the DR-DV5000 and
the camcorder.
6) Re-attach the battery system to the rear
of the DR-DV5000. Ensure to connect all
power cables and utilize the supplied gasket
between DR-DV5000 and the battery system.
Harness any loose cables in the "Hidey-Hole"
on the rear of DR-DV5000.
PAGE 10