Setting The Ip Address Of The Projector - Mitsubishi Electric XL550U User Manual

Preparation/SetUp (continued)

Setting the IP address of the projector

Before setting the IP address, check that the projector has been LAN-networked and turn on the main power of the
projector.
Start the Projector-Control Device Installer.
1
• Select [Start] - [All Programs] - [Mitsubishi] -
[Mitsubishi Projector - Control Device Installer] (in
the case of Windows
Click the Search button.
2
Mitsubishi projector is recognized.
•
(Note)
When Mitsubishi projector isn't recognized, check
the following.
The fi rewall function has been disabled. (When it
•
has been enabled, search may not be conducted.)
The personal computer and the projector are on
•
the same network. (For preventing unauthorized
access.)
• More than one Projector-Control Device Installer
isn't running.
3 Select a projector by clicking the line showing the
projector and click the Assign IP button.
The Assign IP Address screen appears.
4
• For automatic IP address setting by the DHCP server, go to page 6. For IP address setting without using the
DHCP server, go to page 7.
XP).
®
EN-5
Click here