Setting The Lan Control (Lan-Controlled Mode); Setting The Pjlink™ Certifi Cation (Pjlink Certifi Cation Mode) - Mitsubishi Electric XL550U User Manual

Preparation/SetUp (continued)

Setting the LAN control (LAN-Controlled Mode)

Enter "3" and press the Enter key.
1
To enable the e-mail notifi cation function of Projector-
2
View, enter 1 and press the Enter key. (Default is OFF (0).)
(See pages 12 - 15 for ProjectorView function.)
Setting the PJLink™ certifi cation (PJLink certifi cation Mode)
Enter "5" and press the Enter key.
1
When you don't use PJLink™ protocol
•
communication, skip this item. (See page 16 for
PJLink™.)
To enable the PJLink™ certifi cation, enter "1" and
2
press the Enter key. To disable it, enter "0" and press
the Enter key. (Default is ON (1).)
EN-10