Canopy - Miele DA 226-2 Operating And Installation Manual

Retaining plate C only needs to be
fitted if dimension Y is greater than
365 mm. It provides additional stability
for the extension piece.
At a maximum distance of 365 mm
from the ceiling hold retaining plate
C against the wall and use the not-
ches to align it with the middle line.
Mark the two drill holes.
Drill two 8 mm ø holes into the wall ,
and press the S8 plugs into the
holes.
Screw on retaining plate C with two
5 x 40 mm screws.
26
Hang the canopy on the angle
brackets on retaining plate A.
Secure the canopy with two 5 x 60
mm screws.