Cleaning And Care; General Notes; E-Cloth - Miele KM 405 Operating Instructions Manual

General notes

Clean the appliance regularly,
preferably after each use. Allow the
appliance to cool down to a safe
temperature before cleaning.
Do not use a steam cleaner to clean
this appliance. The steam could
reach electrical components and
cause a short circuit. Pressurised
steam could also cause permanent
damage to the surface and to other
components for which the
manufacturer cannot accept liability.
Do not use any sharp objects which
could damage the seal between the
glass surface and the surrounding
frame and between the frame and
the worktop.
Do not use any of the following on
your hob as they can damage the
surface:
cleaning agents containing sand,
soda, alkalines, acids or chlorides,
grill and oven sprays, dishwasher
cleaner, stain or rust removers,
scouring agents or cream cleaners,
abrasive sponges and brushes.
Do not use washing up liquid to
clean the ceramic surface as it can
leave a blue sheen which may be
difficult to remove.

Cleaning and care

When using a glass cleaning agent
follow the manufacturer's
instructions on the packaging.
Do not let the ignitor in the burner
get wet. If it gets wet it will not spark.
After cleaning, dry thoroughly with a
soft cloth to prevent a build up of
limescale deposits.
KM 405-3
Wipe any soiling off the control panel
immediately to prevent the risk of
residual marks.

E-Cloth

A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals.
17