Adderview Pro Features - Front And Rear - ADDER AVPRO-DVI User Manual

AdderView PRO features - front and rear

The AdderView PRO single screen and multiscreen units are housed within
durable, metallic enclosures with all connectors situated at the rear panel. The
smart front face features the control buttons and the operation indicators.
COMPUTER
COMPUTER button
Press to change to The four indicators (KVM, SPK, USB, USB) show which
the next computer peripherals are switched to the current computer channel OR
channel. (as you begin pressing the MODE button) the peripherals that
will be switched during the next press(es) of the COMPUTER
button.
The seven segment numeric display indicates the computer
channel that is currently active.
USER
CONSOLE
5V
2A
OPTIONS
Power input User console
The power supply
Connect DVI-I
connects here.
video, USB
keyboard
and mouse
plus optional
speakers
to these
connectors.
Options port
This 10p10c port can separately support the following functions:
• Remote control - allows a standard Adder RC4 four button remote
control unit to be used to switch channels (see
remote control
• Upgrades - used to update the internal firmware when necessary
by connecting to a computer.
KVM SPK USB1 USB2 MODE
Indicators
4 3 2
Computer channels
Each computer connects to one
of these four channels via a DVI-I
video connector, a USB B-type
connector and an audio 3.5mm
jack input.
Optional RC4
for details).
Multiscreen versions
The Dual, Triple and Quad video screen versions use a larger
casing and provide more connectors on the rear panel.
www.adder.com
MODE button
Press to determine
which peripherals
should be switched
to another computer
channel (will occur
when the COMPUTER
button is pressed.
INDOOR
USE
ONLY
1
USB 1
USB 2
USB2.0
SWITCHED
5V
User console 4A
Connect up to two
USB devices to these
connectors. These ports
are switched in an
enumerated manner
(see What is True
Emulation?)
COMPUTER KVM SPK USB1 USB2 MODE
V1 V2 V3 V4
Extra indicators
As well as the indicators shown on the single screen version,
the multiscreen units also include four indicators, labelled V1 to
V4, which show the video channels being switched.
4 3 2
USER
CONSOLE
OPTIONS
Extra video channels
In addition to all of the ports described (left) for the single
screen version, the multiscreen versions provide additional DVI-I
connectors to allow multiple video streams from each computer
to be switched to (up to) four video monitors.
M U L T I S C R E E N
www.adder.com
V4
V3
V2
V1
1
USB 1
USB 2
USB2.0
SWITCHED