To Select A Computer Using The Mouse Buttons - ADDER AV4PRO-DVI User Manual

To select a computer using the mouse buttons

Using the mouse buttons, you can quickly switch the keyboard, mouse, video
monitor(s), speakers and/or USB peripherals to any computer channel.
Note: These procedures work only with three-button or IntelliMouse devices and
only if the 'Mouse Switching' option has been enabled.
To select a computer using the mouse buttons
1 Hold down the middle button (or scroll wheel) of the mouse.
2 Click the left mouse button to increment the channel number or click the
right mouse button to decrement the channel. When the correct channel is
reached, release the middle button.
When using this method of switching:
• The computer channels that are visited depend upon the configuration

menu setting (see note
• The ports (KVM, audio and/or USB) that are switched using this method
depend upon the switching mode that is currently set using the
panel buttons.
). Choosing which computers are accessed when using mouse buttons
The computer channels that are visited when you use the mouse buttons (or
hotkeys + tab/autoscan) are determined by a setting within the Configuration
front
menu:
1 Enter the Configuration
2 Press and then press either:
to choose Cycle all ports, or
to choose Cycle only active ports
3 Press to accept the setting and return to the main menu section.
4 Press and then
menu.
to exit the menu and save changes.
20