Performing Upgrades - ADDER AV4PRO-DVI User Manual

Performing upgrades

The AV4PRO-DVI unit is fully upgradeable via flash upgrade. Such upgrades
require a Windows-based computer system to be linked via the
Items required to perform an upgrade
• Optional upgrade cable (see
• A Windows-based upgrade computer with an RS232 serial port.
• The latest version of the KVM Firmware Uploader and firmware files for the
AV4PRO-DVI unit - available from the Technical Support > Updates section
of the Adder Technology website (www.adder.com).
To use the KVM Firmware Uploader utility
1 - Obtain and run the KVM Firmware Uploader.
Download the latest AV4PRO-DVI unit KVM Firmware Uploader from the
Adder Technology website and install it on a Windows-based upgrade
computer that will be connected to the AV4PRO-DVI unit. The files
are supplied as a compressed ZIP file. Decompress the ZIP file with an
appropriate tool such as WinZip (www.winzip.com) and copy all contained
files to the same folder on the upgrade computer.
2 - Power off the AV4PRO-DVI unit
Remove the power supply plug from the rear panel of the unit.
3 - Connect the upgrade computer to the AV4PRO-DVI unit
Connect the serial port of the upgrade computer to the
rear panel of the unit using the optional upgrade cable.
5 V
2 A
U S
C O
There is no need to adjust the computer's serial port
settings as the application will do this automatically.
OPTIONS
Appendix 2
for pin-out specifications).
port on the
OPTIONS
E R
N S
O L
E
4
O P
T I O
N S
4 - Invoke upgrade mode
port. While powering on or when already powered: Press and hold the
COMPUTER and MODE buttons (for up to ten seconds) until the numeric
indicator shows ' '.
5 - Run the KVM Firmware Uploader utility
From that folder, select the KVMUploader icon to run the upgrade utility.
The KVM Firmware Uploader dialog will be displayed:
6 - Query the AV4PRO-DVI unit
Click the Query Unit button to confirm that communication is possible with
the AV4PRO-DVI unit and to establish its firmware details. If successful, the
'Unit connected' field should show the name of the AV4PRO-DVI unit and
the current firmware will also be listed.
If the application cannot contact the AV4PRO-DVI unit, re-check the
connection cable and click the Advanced... button to check that the correct
serial port is being used. Change the serial port within the Advanced...
section, if necessary.
continued
16