Miele S 560 series Operating Instructions Manual page 11

^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
suction tube, press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
The floorhead can be used for all
normal cleaning of carpets and rugs.
It can also be used with the brush
protruding to vacuum hard flooring
which is not susceptible to scratching.
For hard flooring, such as stone and
floors which are susceptible to
scratching, e.g. parquet, we
recommend using one of the special
Miele floor brushes (see "Optional
accessories").
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Vacuum carpets and rugs with the
brush retracted:
^ Press the foot switch to the
position.
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^ Press the foot switch to the
position.
Some models may be supplied as stan-
dard with an Electrobrush or a Turbo
brush in addition to the normal
floorhead (see "Optional accessories").
g
h
Please refer to the separate operating
instructions supplied with these
brushes for instructions on use and
maintenance.
11