Building In The Appliance; Weight Of The Furniture Doors; Building Into A Peninsular Run - Miele KFN 9753 iD Operating And Installation Instructions

All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
To install the appliance you will need
the following:
– a cross-slotted screwdriver,
– a selection of Torx screwdrivers,
– a hexagon spanner.

Weight of the furniture doors

Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
KFN 9753 iD
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
max. max.
weight weight
of upper of lower
door in door in
kg kg
14 12

Building in the appliance

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
49