Dynamic Cooling M - Miele KFN 9753 iD Operating And Installation Instructions

Using Super cool, Super freeze and Dynamic cooling
Switching off Super freeze
Depending on the amount of food
placed in the freezer section, the Super
freeze function will switch off
automatically after approx. 30 to 60
hours. The Super freeze indicator light
will go out and the appliance will
continue running at normal power.
To save energy, the Super freeze
function can be switched off once a
constant temperature of -18 °C or
colder has been reached in the freezer
section.
^ Press the Super freeze button. The
Super freeze indicator light will go
out, and the appliance will continue
running at normal power.

Dynamic cooling m

When the Dynamic cooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal with
the temperature control.
Dynamic cooling should also be
selected when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
Switching on Dynamic cooling
^ Press the Dynamic cooling button.
The Dynamic cooling indicator light
will come on.
Switching off Dynamic cooling
^ Press the Dynamic cooling button.
The Dynamic cooling indicator light
will go out.
To save energy, the fan for Dynamic
cooling switches off whilst the door
is open.
21