Table of Contents
Advertisement
If left hand door hinging is required
follow these instructions.
^ Close the lower appliance door.
^ Unscrew the lower hinge bracket a
and take off the door.
^ Take the washer and hinge pin c out
of the hinge bracket, then refit them
in the second hole in the hinge
bracket. (Use the spanner supplied
to unscrew and refit the hinge pin).
^ Remove cover b and use it to cover
the empty holes on the opposite side.
^ With the upper door closed, unscrew
upper hinge bracket e then take the
upper door g off.
^ Take hinge pin d and bush f out of
the hinge bracket and refit them in
the neighbouring hole in the hinge
bracket.
^ Then refit stoppers h on the opposite
side.
44
^ Remove cover plate b.
^ Unscrew bearing block c, turn it
around and fit it on the opposite side.
^ Use the spanner supplied to unscrew
hinge pin d out of bearing block c
and refit it into bearing block from
below.
^ Then refit cover b on the opposite
side.
^ Take stoppers a out of the door
bearing, and refit on the opposite
side.
^ Remove covers e at the front and
slide off.
^ Unscrew handles f and remove
stoppers g. Refit on the opposite
side.
^ Refit the covers e.
Hide quick links:
Advertisement
Table of Contents
