Miele KF 7650 SNE ed Operating And Installation Manual page 15

When pressing the buttons the
following are shown in the display:
– When first pressed the
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current
temperature of the refrigerator or
freezer is automatically shown.
If you have adjusted the temperature,
before checking the temperature
display as it will take this long for the
display to show the accurate
temperature of the appliance. If, after
this time, the temperature is still too
high or too low, you will need to adjust it
again.
The temperature can be adjusted:
– in the refrigerator section from 4 °C
to 9 °C
– in the freezer section from -14 °C to
-28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
flashes.
and
The temperature in the StayFresh zone
is automatically held at approx. 0 °C.
It can be raised or lowered, e.g. if you
want to use it for storing items like fish.
^ Press the alarm button for approx. 7
seconds until a " b " shows in the
temperature display for the
refrigerator section and a "0" shows in
the temperature display for the
freezer section.
To adjust the temperature use the
buttons to the right of the freezer
section temperature display.
Press the
Upper button: to raise the temperature
(it gets warmer)
Lower button: to reduce the
temperature (it gets colder)
15