Temperature Displays - Miele KF 7650 SNE ed Operating And Installation Manual

The temperature is adjustable in steps
from -5 to +5 and is displayed in the
freezer section temperature display.
Each step represents a change in
temperature of approx. 0.5 to 1 °C. If
there is a "-" in front of the figure, the
temperature has been lowered by this
amount.
^ Press the alarm button briefly.
The new temperature has now been
stored in the appliance's memory.
The appliance will automatically
return to normal operation after
approx. 5 minutes if you do not
press any buttons whilst in setting
mode.
During normal operation the
temperature displays on the control
panel show the temperature in the
middle of the refrigerator section and
the temperature in the warmest part of
the freezer section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the refrigerator
section, and if the temperature in the
freezer section is above 0 °C), bars will
flash in the temperature displays.
The
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
16
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. Do not
refreeze thawed or defrosted food! If it
has started thawing, check that the
food is safe to use and if it is, use it as
quickly as possible.
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
The level of brightness can be adjusted
to be:
–
button, and whilst holding it in,
pressing the upper button next to the
temperature display for the freezer
section.
–
, if
button, and whilst holding it in,
pressing the lower button next to the
temperature display for the freezer
section.
by pressing the alarm
by pressing the alarm