Buzzer - Miele T 4222 C Operating Instructions Manual

An audible tone sounds repeatedly at
the end of a programme.
The buzzer is activated as standard ex-
works. It can be deactivated if wished.
The buzzer will sound if there is a fault,
even if it has been deactivated.
Follow steps A to G to programme and
store in memory.
The programmable functions are
activated with the help of the Start
button and the programme selector.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish .
A Press the Start button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the dryer on with the
I-On / 0-Off button.
C Wait until the Start indicator lamp
comes on . . .
D . . . and then release the Start button.
40
E Turn the programme selector to the
COTTONS Hand iron position.
– If the Drying lamp is flashing, the

buzzer

– If the Drying lamp is not on, the
buzzer
F Pressing the Start button switches
between activating and deactivating
the buzzer.
G Switch the machine off with the
I-On / 0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
^ Carry out steps A to E.
If the indicator lamp for Drying
= The Buzzer
= The Buzzer
^ Switch off the dryer.
The check is complete.
.
.