Check Indicator Lamps - Miele T 260 Operating Instructions Manual

26
The system lock is acti-
vated.
The fluff filter in the door is
blocked.
The vent ducting or the
ventilation outlet (e.g. win-
dow or wall vent) is
blocked.
Ventilation to and from the
dryer is insufficient (e.g. in
a small room)
The vent ducting is very
long.
If you wish to use the dryer,
the system lock must be de-
activated (see "Electronic sys-
tem lock").
Clean the fluff filter (see
"Cleaning and care").
Check all parts of the extrac-
tion system on a regular basis
(e.g. wall vent, external grille,
bends in the ducting etc.) and
make sure they are free of any
hindrance. Remove any fluff.
Open a door or window while
drying for increased air flow.
The check lamp will go out
when the door is opened.
See "Installation - venting" on
calculating length and diame-
ter. See also notes in "How to
dry correctly".
If very long ducting is used
then programme times will be
longer and energy consump-
tion higher.