Possible causes and remedies are described above
in 'The "Clean out airways" lamp comes on.'
No obvious cause.
The programme selector
was moved after the be-
ginning of a programme.
The programme contin-
ues to run as normal.
There is no obvious
cause.
– Switch the dryer off.
– Switch the dryer back
on and start the
programme again.
If the programme stops
again and the "Clean out
airways" indicator lamp
flashes, there is a fault.
Contact the Miele Service
Department.
Turn the selector back to
the original position and
the lamp will go out.
– Switch the dryer off.
– Switch the dryer back
on and start the
programme again.
If the programme stops
again and an indicator
lamp flashes, there is a
fault. Contact the Miele
Service Department.
27