Miele K 852i Operating And Installation Manual page 39

Whilst counterholding the adjusting
c
bolts with a screwdriver, tighten
b
nuts at the top of the appliance
door.
Tighten all screws.
Securely screw the appliance to the
housing unit at the top and bottom:
Flap the plastic bracket up and
screw a second screw
the plastic bracket. Tighten both
b
through
screws and flap the plastic bracket
back down.
Align the cover strip
parallel to the top of the housing unit.
The cover strip must not protrude.
Secure the cover strip to the top of
the housing unit using the short
4 x 14 mm chip board screws
Place all covers in position.
c
by sliding it
d
.
39