Miele K 852i Operating And Installation Manual page 38

Hang the furniture door onto adjust-
b
ing bolts .
Loosely attach the nuts
justing bolts.
Shut the door and check the dis-
tance between the door and neigh-
bouring furniture doors.
Align to match neighbouring doors if
necessary:
Side adjustments "X" are made by
sliding the furniture door, and height
adjustments "Y" are made by turning
the adjusting bolts
driver.
Tighten the nuts
38
c
on the ad-
b
with a screw-
c
slightly.
Use fixing bracket
appliance door to the furniture door.
– Using a screwdriver remove cover
– Check that the two metal edges
are flush (see symbol II).
– Drill fixing holes
short 4 x 14 mm chip board screws
f
.
– Align depth Z on the furniture door:
Loosen the cross-slotted screws
at the top of the door, and loosen the
hexagon headed screw
ing bracket at the bottom of the door.
By moving the furniture door create
a gap of 2 mm between the furniture
door and front edge of the niche.
Close the door and align it with
neighbouring furniture doors.
(On large or divided doors attach a sec-
ond pair of fixing brackets
handle region of the door. Use the pre-
drilled holes in the appliance door.)
b
to attach the
d
e
and screw in the
h
on the fix-
b
in the
c
.
g